Back

 

G-40: Flexible, Reliable & Cost Effective!
   
The 

G-40.FT

With the G-40, NRI developed a validator that is used in many areas, but
especially in gaming machines. Its predominating advantages are with respect to
flexibility, cost saving and not least security. Thus the G-40.FT has been tested by
separate measuring methods with assistance by all the leading AWP manufacturers
of gaming machines so as to enable very fast reaction to any manipulation or
counterfeiting, even in markets as difficult as, for example, Latvia. 

The gaming machine industry has already turned the enormous advantage and the 
opportunities provided by the serial interface into hard cash – doing so with the G-40.FT,
a 5"-validator with lateral sorting inside for five coins.
   
   
The Advantages in a Nutshell
  

• A greater degree of coin certainty due to simultaneous 
  assessment of 16 coin parameters
• Two individual memory blocks for changing conditions of use
• 2x16 coin chutes for flexibility of holding in storage
• When necessary, it is possible to change over to narrow
  checking chutes
• Integrated teaching mode to train for three coins/tokens
• High acceptance speed of three coins per second
• Flash technology for updates of the:
– Measuring technology
– Coin data
– Firmware on site
• Programming interface for data block downloads by PC
  or Palm handheld
• Sensitive optical and mechanical thread sensors protect
  against manipulation by threads
• Available as a serial version with:
– MDB/S1-interface
– CCTalk Amusement interface
(Coded log available on request)
  
    

The

Security Features

The G-40 already offers as standard a complete package of valuable security
features such as its serial MDB-compatible log (S1) with a new kind of "data
coding". With it, information about coins or other data can no longer be manipulated
mechanically or by impulses, as only the manufacturers of the validator and
of the equipment know the type of coding. Another security feature of the G-40.FT
is that 16 magnesium parameters are assessed for coin recognition. This produces
reliable recognition of bicolour coins. A precision thread detector can be installed
on request as an option to detect any manipulation using threads.
    

Superior Technology

The advantages of serial linking of automatic machines are a decrease in susceptibility
to malfunctions due to there being few signal lines and improvement in the
amount of information contained in the data, because status reports and similar data
are continually exchanged.

With 

Flash Technology

As with all equipment from NRI, also with the G-40.FT and its variations you can
use the latest Flash technology to download software at any time for adaptations in
the areas of measuring technology, coin data and control system software.
Configuration can be carried out on site at any time using the WinEMP programme
developed by NRI and a Palm handheld.

The G-40 /4 series offers the best possible solution for every application:
  
- G-40 Standard-EMP with parallel interface
- G-40 Serial with MDB-Standard protocol
- G-40 BACTA variant for all AWP-machines
- G-40 SWP version with the best possible front coin-insertion
- G-40 “Amusement” – with integrated crossways sorting.